Search results
Your search phrase
We have found 687 products
In these categories
- Fire resistant systems / standardized supporting constructions (117)
- Fire resistant systems / not standardized supporting constructions (437)
- Cable ladders / cover of cable ladders (3)
- Cable ladders / other accessories (32)
- Cable ladders / supporting and assembling elements (32)
- Cable ladders / fastening and fixing material (115)
- Wire cable trays / supporting and assembling elements (36)
- Wire cable trays / fastening and fixing material (94)
- Cable trays MARS / height 50 - trays (34)
- Cable trays MARS / height 50 - accessories (115)
- Cable trays MARS / height 100 - trays (27)
- Cable trays MARS / height 100 - accessories (113)
- Cable trays MARS / cover of cable trays and shaped parts (121)
- Cable trays MARS / other accessories (55)
- Cable trays MARS / supporting and assembling elements (100)
- Cable trays MARS / fastening and fixing material (135)
- Cable trays JUPITER / cover of cable trays and shaped parts (4)
- Cable trays JUPITER / other accessories (43)
- Cable trays JUPITER / supporting and assembling elements (31)
- Cable trays JUPITER / fastening and fixing material (103)
- Cable trays MARS / height 20 - trays and accessories (10)
NIXKZN 50X62_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the couplings NIXS 100 and by the bolts NIXSM 6X...
NKZI 50X62X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
INOXSK 50_IX
STAINLESS STEEL HINGED JOINT
For the connection of the hinged joint to the tray there are used the bolts NIXSM 6X10. The joint ...
NIXS 50_IX
COUPLING
The joining is performed by using the bolts NIXSM 6X10....
NK 50X62_S
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X62_EO
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X250_F
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NRD 50_S
REDUCTION PIECE
The joining is performed using the bolts NSM 6X10. It serves for creating of additional deviation ...
NT 50X125_F
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 50_ZM
COUPLING
The joining is performed using the bolts NSM 6X10. Note for system with maintained functionalit...
NKZI 100X500X1.00_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXK 100X250_IX
END PIECE
The joining is performed by using the bolts NIXSM 6X10.
The end-piece serves for the ending off a ro...
NIXSO 90X100X250_IX
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X100X125_F
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKR 100X500_S
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X500_EO
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 100_GMT
COUPLING
The joining is performed using the bolts NSM 6X10. Note for system with maintained functionalit...
NT 100X250_EO
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXV 250_IX
CABLE TRAY COVER
The fixing of the cover to the tray is done by using of the cover fixture NIXUV....
NIXVO 90X500_IX
ELBOW COVER 90°
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X500_EO
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 250_F
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X500_S
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X125_EO
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 250_F
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 40_S
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
MDS_GMT
MOUNTING PLATE
For mounting distribution boxes to the cable trays up to a
sidewall height of 60 mm.
It is pushed on...
PKC1 1207_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
DSOS 8_ZNCR
BRACKET FOR TRAPEZE CEILINGS
Cable tray will be attached to the DL holder using the bolts NSM 6X10.Note for system with maintaine...
NIXZ 250_IX
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
NPR 125_EC
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NPS 62_F
WALL BRACKET
The tray is fixed to the support using 1 NSM 6X10 screws.
The support is fixed to the wall using 1 &...
US 3_ZNCR
FIXATION CLAMP
The fixation clamp is used for fixation of the threaded rod on I profile, a
packing includes a fixat...
VS 41X43_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
KPO 10X95_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
M 12_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PD 10_GMT
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 10_GMT
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 12X30_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 8_ZNC1
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
NSM 6X20_ZNCR
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with
accessories, or to attach trays to supp...
NKZI 50X125X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X125X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXK 50X125_IX
END PIECE
The joining is performed by using the bolts NIXSM 6X10.
The end-piece serves for the ending off a ro...
NIXSO 90X50X125_IX
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X50X125_EO
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKR 50X62_F
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X250_S
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 50_EC
COUPLING
The joining is performed using the bolts NSM 6X10.
...
NT 50X125_S
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
SK 50_ZM
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
NKZI 100X500X1.25_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXK 100X500_IX
END PIECE
The joining is performed by using the bolts NIXSM 6X10.
The end-piece serves for the ending off a ro...
NIXSO 90X100X500_IX
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X100X125_S
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X125_EO
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X500_F
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 100_S
COUPLING
The joining is performed using the bolts NSM 6X10. Note for system with maintained functionalit...
NT 100X250_F
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXV 40_IX
CABLE TRAY COVER
The NIXV 40 lid is fixed in place by bending the edges. To fix the lid more firmly to the NIXKZN 20X...
NIXVO 90X62_IX
ELBOW COVER 90°
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X500_F
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 250_S
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X62_EO
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X125_F
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 250_S
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 500_EO
CABLE TRAY / LADDER COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
MDS_S
MOUNTING PLATE
For mounting distribution boxes to the cable trays up to a
sidewall height of 60 mm.
It is pushed on...
PKC1 1208_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
DSS_S
ADJUSTABLE CEILING BRACKET
Used together with a threaded rod ZT 8 or ZT 10.
Ideal for a slight roof construction slant....
NIXZ 500_IX
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods.
...
NPR 125_F
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NPS 62_ZNCR
WALL BRACKET
The tray is fixed to the support using 1 NSM 6X10 screws.
The support is fixed to the wall using 1 &...
VS 41X03_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
VS 41X45_F
ASSEMBLY ACCESSORIES
For attaching the threaded rod to the wall at an angle of 45°. Note for system with maintained ...
KPO 10X95_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
M 6_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PD 10_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 10_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 12X40_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 8_ZNC3
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
NSM 6X20_GMT
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with accessories, or to attach trays to su...
NKZI 50X125X0.70_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X125X0.70_F
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXK 50X250_IX
END PIECE
The joining is performed by using the bolts NIXSM 6X10.
The end-piece serves for the ending off a ro...
NIXSO 90X50X250_IX
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X50X125_F
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKR 50X62_S
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X62_EO
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 50_GMT
COUPLING
The joining is performed using the bolts NSM 6X10. Note for system with maintained functionalit...
NT 50X250_EO
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NSUK 50_ZM
ANGLE COUPLING
The joining is performed using the bolts NSM 6X10.
Angle couplings are mostly used at places where t...
NKZI 100X500X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKO 90X100X125_IX
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXSUK 100_IX
ANGLE COUPLING
The joining is performed by using the bolts NIXSM 6X10. Angle couplings are mostly used at places ...
NKO 90X100X250_EO
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X125_F
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X500_S
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NSO 90X100X125_EO
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 100X250_S
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXV 500_IX
CABLE TRAY COVER
The fixing of the cover to the tray is done by using of the cover fixture NIXUV....
NIXVSO 90X125_IX
RISING ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV. The covers are delivered straight. They are made from o...
NVKO 90X100X500_S
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 500_EO
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X62_F
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X125_S
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 500_EO
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 500_F
CABLE TRAY / LADDER COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NCH_XX
EDGE PROTECTOR
The edge protector made from plastic with a steel
insert is used to protect the edges of cable trays...
PKC1 1209_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
DSZT_F
CEILING BRACKET
Used together with a threaded rod ZT 8 or ZT 10....
NIXZ 62_IX
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
NPR 125_S
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 125_EC
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X05_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNE 125_F
OUTER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN. The dimension of the nut is chosen ...
KPO 12X120_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
M 8_GMT
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PD 12_GMT
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 12_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 12X50_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 8_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
NKZI 50X125X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X125X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXK 50X62_IX
END PIECE
The joining is performed by using the bolts NIXSM 6X10.
The end-piece serves for the ending off a ro...
NIXSO 90X50X62_IX
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X50X125_S
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X125_EO
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X62_F
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 50_S
COUPLING
The joining is performed using the bolts NSM 6X10. Note for system with maintained functionalit...
NT 50X250_F
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXKZN 100X125_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the couplings NIXS 100 and by the bolts NIXSM 6X...
NKZIN 100X125X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKO 90X100X250_IX
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXT 100X125_IX
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X100X250_F
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X125_S
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NPZ 100_EC
PARTITION
The fixing of the partition is carried out by bolts NSM 6X10. The partition serves to spatial sepa...
NSO 90X100X125_F
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 100X500_EO
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXV 62_IX
CABLE TRAY COVER
The fixing of the cover to the tray is done by using of the cover fixture NIXUV....
NIXVSO 90X250_IX
RISING ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV. The covers are delivered straight. They are made from o...
NVKO 90X50X125_EO
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 500_F
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X62_S
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X250_EO
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 500_F
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 500_S
CABLE TRAY / LADDER COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NIXUV_IX
STAINLESS STEEL COVER FIXTURE
Used to fasten lids to trays or fittings with a NIXSM 6X10 screw. The number of anchors on the lid...
NUV_EC
COVER FIXTURE
Serves for the attaching of the cover to the tray using a bolt.
With NKZIN non-perforated trays the ...
PKC1 1210_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
DSZT_S
CEILING BRACKET
Used together with a threaded rod ZT 8 or ZT 10....
NKO_F
BRACKET
For the attachment of the assembly profile to the bracket there is used the NSMP 10X40.
Brackets may...
NPR 250_EC
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 125_F
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X06_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNE 125_S
OUTER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN. The dimension of the nut is chosen ...
KPO 12X120_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
M 8_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PD 12_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 6_GMT
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NSM 6X10_GMT
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with accessories, or to attach trays to su...
NIXKZN 20X40_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the coupling NIXS 40 and by two bolts NIXSMP 5X1...
NKZI 50X125X1.25_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X125X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKO 90X50X125_IX
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXSUK 50_IX
ANGLE COUPLING
The joining is performed by using the bolts NIXSM 6X10. Angle couplings are mostly used at places ...
NKO 90X50X250_EO
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X125_F
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X62_S
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NSO 90X50X125_EO
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 50X250_S
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXKZN 100X250_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the couplings NIXS 100 and by the bolts NIXSM 6X...
NKZIN 100X125X0.80_F
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKO 90X100X500_IX
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXT 100X250_IX
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X100X250_S
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X250_EO
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NPZ 100_F
PARTITION
The fixing of the partition is carried out by bolts NSM 6X10. The partition serves to spatial sepa...
NSO 90X100X125_S
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 100X500_F
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXVKO 90X100X125_IX
LOW ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV.
The covers are delivered straight. They are made from one...
NIXVSO 90X500_IX
RISING ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV. The covers are delivered straight. They are made from o...
NVKO 90X50X125_F
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 500_S
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X125_EO
ELBOW COVER 90°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X250_F
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 500_S
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 62_EO
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NKP 11_FB
BUSHING
Bushings serve for the safe passing of the cables through the sheet metal. One part of the bushing...
NUV_S
COVER FIXTURE
Serves for the attaching of the cover to the tray using a bolt.
With NKZIN non-perforated trays the ...
PKC1 1211_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
INOXMP 41X21_IX
ASSEMBLY PROFILE STAINLESS STEEL
Suitable for creating of beam for cable traces to be carried on thread bars or for creating of sup...
NKSD_EC
DOUBLE VERTICAL BRACKET
The bracket is designed to anchor the mounting profile on the ceiling or floor.
The fixing is carrie...
NPR 250_F
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 125_S
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X08_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNE 250_F
OUTER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN. The dimension of the nut is chosen ...
KPO 6X50_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
MN 10_ZNCR
RIVETING NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PD 6_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 6_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KBS 6X35 M8/M10_PO
BOLT INTO CONCRETE WITH INTERNAL THREAD
M8 / M10 combined screw for quick and easy mounting of screws or threaded rods. Designed for insta...
NIXS 40_IX
COUPLING
The joining is performed by using the bolts NIXSMP 5X10.
...
NKZI 50X125X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X250X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKO 90X50X250_IX
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXT 50X125_IX
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X50X250_F
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X125_S
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NPZ 50_EC
PARTITION
The fixing of the partition is carried out by bolts NSM 6X10. The partition serves to spatial sepa...
NSO 90X50X125_F
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 50X62_EO
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXKZN 100X500_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the couplings NIXS 100 and by the bolts NIXSM 6X...
NKZIN 100X125X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKR 100X125_IX
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXT 100X500_IX
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X100X500_EO
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X250_F
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NPZ 100_S
PARTITION
The fixing of the partition is carried out by bolts NSM 6X10. The partition serves to spatial sepa...
NSO 90X100X250_EO
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 100X500_S
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXVKO 90X100X250_IX
LOW ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV.
The covers are delivered straight. They are made from one...
NIXVSO 90X62_IX
RISING ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV. The covers are delivered straight. They are made from o...
NVKO 90X50X125_S
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 62_EO
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X125_F
ELBOW COVER 90°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X250_S
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 62_EO
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 62_F
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NKP 13_FB
BUSHING
Bushings serve for the safe passing of the cables through the sheet metal. One part of the bushing...
OKKZ 32X75_FB
CABLE TRAY BUSHING
Bushings serve for safe leading of cables from the cable tray.
Specified for cable trays with openin...
PKC1 1212_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
MP 41X21_F
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NKSD_F
DOUBLE VERTICAL BRACKET
The bracket is designed to anchor the mounting profile on the ceiling or floor.
The fixing is carrie...
NPR 250_S
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 250_EC
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X12_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNE 250_S
OUTER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN. The dimension of the nut is chosen ...
KPO 6X70_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
MN 8_ZNCR
RIVETING NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PD 8_GMT
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 8_GMT
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X20_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KPO 8X110_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
NKZ 20X40_EO
CABLE TRAY PERFORATED
The standard length of the cable tray is 2 m. The joining of the trays is performed using the coup...
NKZI 50X250X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X250X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKO 90X50X62_IX
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXT 50X250_IX
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X50X250_S
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X250_EO
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NPZ 50_F
PARTITION
The fixing of the partition is carried out by bolts NSM 6X10. The partition serves to spatial sepa...
NSO 90X50X125_S
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 50X62_F
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKZI 100X125X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X250X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKR 100X250_IX
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NK 100X125_EC
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKO 90X100X500_F
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X250_S
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 100X125_EC
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X100X250_F
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 100X125_F
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NIXVKO 90X100X500_IX
LOW ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV.
The covers are delivered straight. They are made from one...
NIXVT 125_IX
T-PIECE COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X50X250_EO
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 62_F
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X125_S
ELBOW COVER 90°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X500_EO
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 62_F
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 62_S
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NKP 16_FB
BUSHING
Bushings serve for the safe passing of the cables through the sheet metal. One part of the bushing...
OKKZ 57X57_FB
CABLE TRAY BUSHING
Bushings serve for safe leading of cables from the cable tray.
Specified for cable trays with openin...
VU_GMT
COVER FIXTURE
Is used for a bolt free attachment of the cover to the tray
and to the accessories.
The cover fixtur...
MP 41X21_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NKSJ_EC
SINGLE VERTICAL BRACKET
The bracket is designed to anchor the mounting profile on the ceiling or floor.
The fixing is carrie...
NPR 500_EC
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 250_F
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X13_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNE 62_F
OUTER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN. The dimension of the nut is chosen ...
KPO 8X77_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
MZ 10_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
PD 8_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PVL 8_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X20_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KPO 10X175_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
NKZ 20X40_F
CABLE TRAY PERFORATED
The standard length of the cable tray is 2 m. The joining of the trays is performed using the coup...
NKZI 50X250X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X250X1.00_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKR 50X125_IX
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXT 50X62_IX
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X50X62_EO
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X250_F
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NPZ 50_S
PARTITION
The fixing of the partition is carried out by bolts NSM 6X10. The partition serves to spatial sepa...
NSO 90X50X250_EO
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NT 50X62_S
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKZI 100X125X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X250X0.80_F
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKR 100X500_IX
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NK 100X125_F
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKO 90X100X500_S
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X500_EO
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 100X125_F
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X100X250_S
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 100X125_S
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NIXVKO 90X50X125_IX
LOW ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV.
The covers are delivered straight. They are made from one...
NIXVT 250_IX
T-PIECE COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X50X250_F
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 62_S
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X250_EO
ELBOW COVER 90°
To fix the cover use 5 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X500_F
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVT 62_S
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 500_ZM
CABLE TRAY / LADDER COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NKP 21_FB
BUSHING
Bushings serve for the safe passing of the cables through the sheet metal. One part of the bushing...
PKC1 1198_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
MP 41X21X1.50_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NKSJ_F
SINGLE VERTICAL BRACKET
The bracket is designed to anchor the mounting profile on the ceiling or floor.
The fixing is carrie...
NPR 500_F
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 250_S
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X16_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNE 62_S
OUTER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN. The dimension of the nut is chosen ...
KPO 8X77_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
MZ 12_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
PM 41 M 10_GMT
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X20_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X30_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KHP 6X32_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
NKZ 20X40_S
CABLE TRAY PERFORATED
The standard length of the cable tray is 2 m. The joining of the trays is performed using the coup...
NKZI 50X250X1.00_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X250X1.00_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKR 50X250_IX
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NK 50X125_EC
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKO 90X50X62_F
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X250_S
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 50X125_EC
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X50X250_F
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 50X125_F
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NKZI 100X125X0.80_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X250X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXO 90X100X125_IX
ELBOW 90°
The arc is used to create a 90° branch in a horizontal
direction.
The connection is performed by dir...
NK 100X125_S
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X125_EO
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X500_F
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 100X125_S
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X100X500_EO
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 100X250_F
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NIXVKO 90X50X250_IX
LOW ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV.
The covers are delivered straight. They are made from one...
NIXVT 500_IX
T-PIECE COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X50X250_S
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVO 45X125_EO
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X250_F
ELBOW COVER 90°
To fix the cover use 5 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X500_S
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
V 125_EO
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
KSV_GMT
CLAMP
Is used for securing the connection of cable trays
or the attaching of the mounting plate MDS....
NKP 29_FB
BUSHING
Bushings serve for the safe passing of the cables through the sheet metal. One part of the bushing...
PKC1 1199_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
MP 41X21X1.50X2000_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NMP 1200_F
ASSEMBLY PROFILE
For the attachment of the assembly profile there is used the bracket NKO.
...
NPR 500_S
CLAMP SUPPORT
The tray is fixed to the support using 2 NSM 6X10 screws.
When installed in an assembly profile, the...
NZ 500_EC
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X17_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNI 125_F
INNER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN.
The dimension of the nut is chosen by...
KKZ 10_ZNCR
METAL ANCHOR
The knock in anchors KKZ serve for the direct attachment of the threaded rods. There is a strut pi...
KPO 8X97_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
MZ 6_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
PM 41 M 10_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X20_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X40_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KHP 8X38_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
NKZN 20X40_EO
CABLE TRAY NON-PERFORATED
The standard length of the cable tray is 2 m. The joining of the trays is performed using the coup...
NKZI 50X250X1.00_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X250X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXKR 50X62_IX
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NK 50X125_F
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKO 90X50X62_S
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X62_EO
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 50X125_F
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X50X250_S
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 50X125_S
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NKZI 100X125X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X500X1.00_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXO 90X100X250_IX
ELBOW 90°
The arc is used to create a 90° branch in a horizontal
direction.
The connection is performed by dir...
NK 100X250_EC
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X125_F
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X100X500_S
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 100X250_EC
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X100X500_F
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 100X250_S
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NIXVKO 90X50X62_IX
LOW ELBOW 90° COVER
To fix the cover use cover fixtures NIXUV.
The covers are delivered straight. They are made from one...
NIXVT 62_IX
T-PIECE COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X50X62_EO
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVO 45X125_F
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X250_S
ELBOW COVER 90°
To fix the cover use 5 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVSO 90X62_EO
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
V 125_F
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NKP 9_FB
BUSHING
Bushings serve for the safe passing of the cables through the sheet metal. One part of the bushing...
PKC1 1200_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
MP 41X41_F
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NMP 2000_F
ASSEMBLY PROFILE
For the attachment of the assembly profile there is used the bracket NKO.
...
NPS 125_EC
WALL BRACKET
The tray is fixed to the support using 2 NSM 6X10 screws.
The support is fixed to the wall using 2 &...
NZ 500_F
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X18_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNI 125_S
INNER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN.
The dimension of the nut is chosen by...
KKZ 12_ZNCR
METAL ANCHOR
The knock in anchors KKZ serve for the direct attachment of the threaded rods. There is a strut pi...
KPO 8X97_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
MZ 8_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
PM 41 M 12_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X30_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X50_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KHP 8X60_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
NKZN 20X40_S
CABLE TRAY NON-PERFORATED
The standard length of the cable tray is 2 m. The joining of the trays is performed using the coup...
NKZI 50X250X1.00_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X62X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXO 90X50X125_IX
ELBOW 90°
The arc is used to create a 90° branch in a horizontal
direction.
The connection is performed by dir...
NK 50X125_S
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X125_EO
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X62_F
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 50X125_S
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X50X62_EO
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 50X250_F
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NKZI 100X250X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X500X1.25_F
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXO 90X100X500_IX
ELBOW 90°
The arc is used to create a 90° branch in a horizontal
direction.
The connection is performed by dir...
NK 100X250_F
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X125_S
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X125_EO
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 100X250_F
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X100X500_S
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 100X500_F
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NIXVKR 125_IX
CROSS-OVER COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X125_EO
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKO 90X50X62_F
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVO 45X125_S
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X500_EO
ELBOW COVER 90°
To fix the cover use 5 pcs of cover fixutres VU.
For the elbow cover NVO 90X500 the outer right angl...
NVSO 90X62_F
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
V 125_S
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NPKV 125_F
SUPPORTING PROFILE FOR CABLE CLAMPS
The supporting profiles is designated for the cable trays.
It is installed on the bottom of the cabl...
PKC1 1201_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
MP 41X41_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NMP 300_F
ASSEMBLY PROFILE
For the attachment of the assembly profile there is used the bracket NKO.
...
NPS 125_F
WALL BRACKET
The tray is fixed to the support using 2 NSM 6X10 screws.
The support is fixed to the wall using 2 &...
NZ 500_S
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X20_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNI 250_S
INNER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN.
The dimension of the nut is chosen by...
KKZ 6_ZNCR
METAL ANCHOR
The knock in anchors KKZ serve for the direct attachment of the threaded rods. There is a strut pi...
KPOZ 10_PO
METAL ANCHOR
The knock in anchors serve for the direct attachment of the threaded rods. The loading capacity of...
NIXSM 6X10_IX
BOLT WITH AROUND HEAD AND LOCK NUT
Lock washers serves to the securing of inductive interconnection....
PM 41 M 6_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X40_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X70_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
KHP 10X60_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
NS 40_EC
COUPLING
The joining is performed using the bolts NSMP 5X10....
NKZI 50X250X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X62X0.70_F
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXO 90X50X250_IX
ELBOW 90°
The arc is used to create a 90° branch in a horizontal
direction.
The connection is performed by dir...
NK 50X250_EC
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X125_F
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 45X50X62_S
ELBOW 45°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 50X62_EC
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X50X62_F
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 50X250_S
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NKZI 100X250X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X125X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXPZ 100_IX
PARTITION
The fixing of the partition is carried out by bolts
NIXSM 6X10....
NK 100X250_S
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X250_EO
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X125_F
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 100X250_S
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSUK 100_GMT
ANGLE COUPLING
The joining is performed using the bolts NSM 6X10.
Angle couplings are mostly used at places where t...
OSHK 100X500_S
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NIXVKR 250_IX
CROSS-OVER COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X125_F
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKO 90X50X62_S
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVO 45X250_EO
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X500_F
ELBOW COVER 90°
To fix the cover use 5 pcs of cover fixutres VU.
For the elbow cover NVO 90X500 the outer right angl...
NVSO 90X62_S
RISING ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
V 250_EO
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NPKV 125_S
SUPPORTING PROFILE FOR CABLE CLAMPS
The supporting profiles is designated for the cable trays.
It is installed on the bottom of the cabl...
PKC1 1202_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
NUV_GMT
COVER FIXTURE
Serves for the attaching of the cover to the tray using a bolt. With NKZIN non-perforated trays th...
NIXDS 125_IX
WALL BRACKET
Cable tray attaching to the wall support is carried out by bolts NIXSM 6X10.
The support is fixed to...
NMP 600_F
ASSEMBLY PROFILE
For the attachment of the assembly profile there is used the bracket NKO.
...
NPS 125_ZNCR
WALL BRACKET
The tray is fixed to the support using 2 NSM 6X10 screws.
The support is fixed to the wall using 2 &...
NZ 62_EC
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X27_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNI 62_F
INNER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN.
The dimension of the nut is chosen by...
KKZ 8_ZNCR
METAL ANCHOR
The knock in anchors KKZ serve for the direct attachment of the threaded rods. There is a strut pi...
KPOZ 6_PO
METAL ANCHOR
The knock in anchors serve for the direct attachment of the threaded rods. The loading capacity of...
NIXSMP 5X10_IX
BOLT + NUT + LOCK WASHERS
Lock washers serves to the securing of inductive interconnection.
...
PM 41 M 8_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X40_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 10_GMT
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
S 8X25_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
NS 40_GMT
COUPLING
The joining is performed using the bolts NSMP 5X10....
NKZI 50X62X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X62X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXO 90X50X62_IX
ELBOW 90°
The arc is used to create a 90° branch in a horizontal
direction.
The connection is performed by dir...
NK 50X250_F
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X125_S
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X125_EO
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 50X62_F
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSO 90X50X62_S
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
OSHK 50X62_F
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NKZI 100X250X0.80_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X250X0.70_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXR 100X125_IX
REDUCTION
The joining is performed by using the bolts NIXSM 6X10.
The reduction is used for the transition bet...
NK 100X500_EC
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X250_F
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X125_S
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NRD 100_EC
REDUCTION PIECE
The joining is performed using the bolts NSM 6X10. It serves for creating of additional deviation ...
NSUK 100_S
ANGLE COUPLING
The joining is performed using the bolts NSM 6X10.
Angle couplings are mostly used at places where t...
SK 100_GMT
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
NIXVKR 500_IX
CROSS-OVER COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X125_S
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 125_EO
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X250_F
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X500_S
ELBOW COVER 90°
To fix the cover use 5 pcs of cover fixutres VU.
For the elbow cover NVO 90X500 the outer right angl...
NVT 125_EO
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 250_F
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NPKV 250_F
SUPPORTING PROFILE FOR CABLE CLAMPS
The supporting profiles is designated for the cable trays.
It is installed on the bottom of the cabl...
PKC1 1203_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
SPK 200X4.6_IX
TIGHTENING BELT
The tightening strap used to fixed the NIXV 40 lid to the NIXKZN 20X40 tray. The connection is not...
NIXDS 250_IX
WALL BRACKET
Cable tray attaching to the wall support is carried out by bolts NIXSM 6X10.
The support is fixed to...
NMP 800_F
ASSEMBLY PROFILE
For the attachment of the assembly profile there is used the bracket NKO.
...
NPS 250_EC
WALL BRACKET
The tray is fixed to the support using 2 NSM 6X10 screws.
The support is fixed to the wall using 2 &...
NZ 62_F
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X31_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
ZVNI 62_S
INNER HANGER
It is mounted using the threaded rod ZT 8 or ZT 10 and nut MN.
The dimension of the nut is chosen by...
KKZM 10_XX
BRASS STOP ANCHOR
The knock in anchors KKZM serve for the direct attachment of the threaded rods. The brass anchors ...
KPOZ 8_PO
METAL ANCHOR
The knock in anchors serve for the direct attachment of the threaded rods. The loading capacity of...
NSM 6X10_ZNCR
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with
accessories, or to attach trays to supp...
PMP 41 M 10_ZNCR
SLIDING NUT WITH SPRING
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X50_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 10_ZNC3
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
S 8X30_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
NS 40_S
COUPLING
The joining is performed using the bolts NSMP 5X10....
NKZI 50X62X0.70_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X62X1.25_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXPZ 50_IX
PARTITION
The fixing of the partition is carried out by bolts
NIXSM 6X10....
NK 50X250_S
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X250_EO
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X125_F
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NR 50X62_S
REDUCTION
The joining is performed using the bolts NSM 6X10.
The reduction is used for the transition between ...
NSUK 50_GMT
ANGLE COUPLING
The joining is performed using the bolts NSM 6X10.
Angle couplings are mostly used at places where t...
OSHK 50X62_S
VERTICAL BRANCH - HORIZONTAL
This part enables a vertical route to be switched to
horizontal.
Particularly suitable for the main ...
NKZI 100X250X1.25_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 100X500X1.00_EO
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXR 100X250_IX
REDUCTION
The joining is performed by using the bolts NIXSM 6X10.
The reduction is used for the transition bet...
NK 100X500_F
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X250_S
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X250_EO
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NRD 100_F
REDUCTION PIECE
The joining is performed using the bolts NSM 6X10. It serves for creating of additional deviation ...
NT 100X125_EO
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
SK 100_S
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
NIXVKR 62_IX
CROSS-OVER COVER
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X250_EO
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 125_F
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X250_S
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X62_EO
ELBOW COVER 90°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVT 125_F
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 250_S
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NPKV 250_S
SUPPORTING PROFILE FOR CABLE CLAMPS
The supporting profiles is designated for the cable trays.
It is installed on the bottom of the cabl...
PKC1 1204_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
NUV_ZM
COVER FIXTURE
Serves for the attaching of the cover to the tray using a bolt.
With NKZIN non-perforated trays the ...
NIXDS 500_IX
WALL BRACKET
Cable tray attaching to the wall support is carried out by bolts NIXSM 6X10.
The support is fixed to...
NPPVZ_S
SAFETY LOCK
The safety lock is used to secure clamp supports type NPR in the assembly profile.
...
NPS 250_F
WALL BRACKET
The tray is fixed to the support using 2 NSM 6X10 screws.
The support is fixed to the wall using 2 &...
NZ 62_S
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
VS 41X36_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
KKZM 8_XX
BRASS STOP ANCHOR
The knock in anchors KKZM serve for the direct attachment of the threaded rods. The brass anchors ...
M 10_GMT
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NSMP 10X40_ZNCR
CARRIAGE BOLT + NUT + PLAIN WASHER
This bolt is used to fasten the NMP mounting profile to the NKO
bracket....
PMP 41 M 12_ZNCR
SLIDING NUT WITH SPRING
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X70_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 10_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
S 10X25_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
NIXKZN 50X125_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the couplings NIXS 100 and by the bolts NIXSM 6X...
NKZI 50X62X0.70_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X62X1.25_F
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXR 50X125_IX
REDUCTION
The joining is performed by using the bolts NIXSM 6X10.
The reduction is used for the transition bet...
NK 50X62_EC
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X250_F
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X125_S
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NRD 50_EC
REDUCTION PIECE
The joining is performed using the bolts NSM 6X10. It serves for creating of additional deviation ...
NSUK 50_S
ANGLE COUPLING
The joining is performed using the bolts NSM 6X10.
Angle couplings are mostly used at places where t...
SK 50_GMT
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
NKZI 100X250X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
INOXSK 100_IX
STAINLESS STEEL HINGED JOINT
For the connection of the hinged joint to the tray there are used the bolts NIXSM 6X10. The joint...
NIXS 100_IX
COUPLING
The joining is performed by using the bolts NIXSM 6X10....
NK 100X500_S
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 100X500_EO
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X250_F
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NRD 100_S
REDUCTION PIECE
The joining is performed using the bolts NSM 6X10. It serves for creating of additional deviation ...
NT 100X125_F
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NSUK 100_ZM
ANGLE COUPLING
The joining is performed using the bolts NSM 6X10.
Angle couplings are mostly used at places where t...
NIXVO 90X125_IX
ELBOW COVER 90°
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X250_F
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 125_S
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X500_EO
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X62_F
ELBOW COVER 90°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVT 125_S
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 40_EO
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NPKV 500_F
SUPPORTING PROFILE FOR CABLE CLAMPS
The supporting profiles is designated for the cable trays.
It is installed on the bottom of the cabl...
PKC1 1205_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
MDS_ZM
MOUNTING PLATE
For mounting distribution boxes to the cable trays up to a
sidewall height of 60 mm.
It is pushed on...
NIXDS 62_IX
WALL BRACKET
Cable tray attaching to the wall support is carried out by bolts NIXSM 6X10.
The support is fixed to...
NPPZ_EC
WASHER
The fixation is made by the screw S 10X40 for single-sided assembling
or S 10X70 for both-sided asse...
NPS 250_ZNCR
WALL BRACKET
The tray is fixed to the support using 2 NSM 6X10 screws.
The support is fixed to the wall using 2 &...
US 1_ZNCR
FIXATION CLAMP
The fixation clamp is used for fixation of the threaded rod on I profile, a
packing includes a fixat...
VS 41X37_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41. Fastening is performed using the bo...
KPO 10X115_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
M 10_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NSMP 5X10_ZNCR
BOLT + NUT + LOCK WASHERS
The NSMP 5X10 bolt is for attaching the connection of the
NKZ 20X40 cable tray.
To protect the cable...
PMP 41 M 6_ZNCR
SLIDING NUT WITH SPRING
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X70_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 12_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
S 10X30_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
NIXKZN 50X250_IX
NON-PERFORATED CABLE TRAY
The joining of the trays is performed by using of the couplings NIXS 100 and by the bolts NIXSM 6X...
NKZI 50X62X1.25_F
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NKZIN 50X62X1.25_S
CABLE TRAY WITH INTEGRATED COUPLING, NON-PERFORATED
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXR 50X62_IX
REDUCTION
The joining is performed by using the bolts NIXSM 6X10.
The reduction is used for the transition bet...
NK 50X62_F
END PIECE
The joining is performed using the bolts NSM 6X10.
The end-piece serves for the ending off a route.N...
NKR 50X250_S
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X50X250_EO
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NRD 50_F
REDUCTION PIECE
The joining is performed using the bolts NSM 6X10. It serves for creating of additional deviation ...
NT 50X125_EO
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
SK 50_S
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
NKZI 100X500X1.00_EO
CABLE TRAY WITH INTEGRATED COUPLING
For securing the connection of the trays with the integrated coupling there are used the clamps ma...
NIXK 100X125_IX
END PIECE
The joining is performed by using the bolts NIXSM 6X10.
The end-piece serves for the ending off a ro...
NIXSO 90X100X125_IX
RISING ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKO 90X100X125_EO
LOW ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NKR 100X500_F
CROSS-OVER
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NO 90X100X250_S
ELBOW 90°
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NS 100_EC
COUPLING
The joining is performed using the bolts NSM 6X10. Note for system with maintained functionalit...
NT 100X125_S
T-PIECE
The connection is performed by direct sliding of the
cable tray into the shaped piece and subsequent...
NIXV 125_IX
CABLE TRAY COVER
The fixing of the cover to the tray is done by using of the cover fixture NIXUV....
NIXVO 90X250_IX
ELBOW COVER 90°
To fix the cover use cover fixtures NIXUV....
NVKO 90X100X250_S
LOW ELBOW 90° COVER
To fix the cover use 4 pcs of cover fixutres VU.
The covers are delivered straight. They are made fr...
NVKR 250_EO
CROSS-OVER COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 45X500_F
ELBOW COVER 45°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVO 90X62_S
ELBOW COVER 90°
To fix the cover use 3 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
NVT 250_EO
T-PIECE COVER
To fix the cover use 4 pcs of cover fixutres VU.Note for system with maintained functionality in fir...
V 40_F
CABLE TRAY COVER
The standard length of the cable tray cover is 2 m. Stated sheet metal thickness is delivered as s...
NPKV 500_S
SUPPORTING PROFILE FOR CABLE CLAMPS
The supporting profiles is designated for the cable trays.
It is installed on the bottom of the cabl...
PKC1 1206_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
DSOS 10_ZNCR
BRACKET FOR TRAPEZE CEILINGS
Fix to the celling profile SPLN, SPSN or SPU using bolts S 10X20, nuts M 10 and washer PD 10.Note fo...
NIXZ 125_IX
SUSPENSION PIECE
It is used to suspend a cable tray in combination with threaded rods....
NPPZ_F
WASHER
The fixation is made by the screw S 10X40 for single-sided assembling
or S 10X70 for both-sided asse...
NPS 62_EC
WALL BRACKET
The tray is fixed to the support using 1 NSM 6X10 screws.
The support is fixed to the wall using 1 &...
US 2_ZNCR
FIXATION CLAMP
The fixation clamp is used for fixation of the threaded rod on I profile, a
packing includes a fixat...
VS 41X41_F
ASSEMBLY ACCESSORIES
Designed for use with assembly profiles MP 41X21 and MP 41X41.
...
KPO 10X115_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
M 12_GMT
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NSMP 6X10_ZNCR
BOLT + NUT + LOCK WASHERS
This bolt is used to connect cable trays or cable trays with
accessories, or to attach trays to supp...
PMP 41 M 8_ZNCR
SLIDING NUT WITH SPRING
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 12X20_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
ZT 6_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
S 12X25_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...