Search results
Your search phrase
We have found 488 products
In these categories
- Wiring boxes / in hollow walls (5)
- Wiring pipes / accessories (26)
- Fire resistant systems / standardized supporting constructions (488)
- Fire resistant systems / not standardized supporting constructions (444)
- Fixing materials / clamps (52)
- Cable ladders / výška 60 - lávky (19)
- Cable ladders / height 60 - accessories (51)
- Cable ladders / other accessories (16)
- Cable ladders / supporting and assembling elements (45)
- Cable ladders / fastening and fixing material (89)
- Wire cable trays / supporting and assembling elements (13)
- Wire cable trays / fastening and fixing material (87)
- Cable trays MARS / other accessories (16)
- Cable trays MARS / supporting and assembling elements (15)
- Cable trays MARS / fastening and fixing material (89)
- Cable trays JUPITER / height 60 - trays (10)
- Cable trays JUPITER / height 60 - accessories (151)
- Cable trays JUPITER / other accessories (16)
- Cable trays JUPITER / supporting and assembling elements (45)
- Cable trays JUPITER / fastening and fixing material (89)
KSK 175_PO16
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The box is equipped with a ceramic terminal bl...
KSK 100_PO
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The box is equipped with a ceramic terminal bl...
KSK 100_PO10J
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The box is equipped with a ceramic terminal bl...
KPZ-1_PO
FIRE RESISTANT WALL BOX
Wiring device box for fire partitions. Suitable for installation in plasterboard and aerated concr...
KSK 125_2PO6
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire: Boxes are fitted with 5 ceramic terminal b...
KSK 125_DPO
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The box is equipped with a ceramic terminal bl...
KSK 125_PO10
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The box is equipped with a ceramic terminal bl...
KPZ 68-45_PO
FIRE RESISTANT WALL BOX
In case of fire, it provides integrity and insulation for up to 90 minutes (EI 15 - EI 90). The en...
KSK 125_PO6P
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The boxes are equipped with terminal blocks to...
KPZ 68-50/2_PO
FIRE RESISTANT WALL BOX
In case of fire, it provides integrity and insulation for up to 90 minutes (EI 15 - EI 90). The en...
KSK 175_2PO10
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:Boxes are fitted with 5 ceramic terminal block...
KPZ 68-50/3_PO
FIRE RESISTANT WALL BOX
In case of fire, it provides integrity and insulation for up to 90 minutes (EI 15 - EI 90). The en...
KSK 175_DPO
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The box is equipped with a ceramic terminal bl...
KSK 100_PO6J
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire: The box is equipped with a ceramic termina...
KPZ 68-60_PO
FIRE RESISTANT WALL BOX
In case of fire, it provides integrity and insulation for up to 90 minutes (EI 15 - EI 90). The en...
KSK 175_PO10P
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire:The boxes are equipped with terminal blocks to...
KSK 100_PO4J
ELECTRICAL BOXES WITH MAINTAINED FUNCTIONALITY IN FIRE
Note for system with maintained functionality in fire: The box is equipped with a ceramic termina...
5220 ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5250 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
DT 150_F
BRACKET - HEAVY
The holder is designed to be mounted on a wall or a ceiling
profile.
For assembly to the ceiling pro...
K 60X50_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X400_F
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLOBH 60X400_F
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X300_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 12X120_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X150_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 200_POF
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
M 6_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NCH_XX
EDGE PROTECTOR
The edge protector made from plastic with a steel
insert is used to protect the edges of cable trays...
O 90X60X100_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X150_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 12_GMT
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PKC1 1209_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
S 10X20_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X50_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X50_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 400_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X300_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X300_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 8_ZNC1
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
KHP 10X60_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
S 10X25_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
KS_PO4J
CERAMIC CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
6725_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KSP 5.5X19_PO
METAL SHEET SELF-DRILLING SCREW
Screw designed to connect two metal parts with thickness 1,5 to 5,0 mm. When connesting the 67XX_P...
KL 60X400_ZM
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
5225 ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5263 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
DT 200_F
BRACKET - HEAVY
The holder is designed to be mounted on a wall or a ceiling
profile.
For assembly to the ceiling pro...
K 60X50_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X400_PO
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLOBH 60X400_S
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X300_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 12X120_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X200_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 300_PO
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X100X1.50_PO
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
M 8_GMT
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NP 100_F
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X150_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X200_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 12_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PKC1 1210_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
S 10X20_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X70_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X50_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 500_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X300_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X300_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 8_ZNC3
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
SVD 30_PO
THREADED SCREW
Threaded screw with external thread M6. Combined with the DOBRMAN clamp, it forms a fire resistant...
S 10X30_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
KS_PO6J
CERAMIC CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
6725_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KSP-V16 5.5X19_PO
METAL SHEET SELF-DRILLING SCREW WITH SEALING WASHER
Screw designed to connect two metal parts with thickness 1,5 to 5,0 mm. When connesting the 67XX_P...
SK 60_ZM
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
5232 ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
6706_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
DT 250_F
BRACKET - HEAVY
The holder is designed to be mounted on a wall or a ceiling
profile.
For assembly to the ceiling pro...
K 60X75_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X400_POF
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLSU_F
CABLE LADDER WALL BRACKET
Use screws NSM 6X10 for installation to cable ladder.
The 8 mm anchor is used for mounting on the wa...
KO 90X60X400_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 6X50_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X200_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 300_POF
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X100X1.50_POF
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
M 8_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NP 100_S
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X150_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X200_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 6_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PKC1 1211_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
S 10X30_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SB 6.3X35_POGMT
CONCRETE SCREW
Note for system with maintained functionality in fire: Used to attach independent cable clamps, O...
SO 90X60X75_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 600_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X350_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X400_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 8_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
SVD 40_PO
THREADED SCREW
Threaded screw with external thread M6. Combined with the DOBRMAN clamp, it forms a fire resistant...
S 12X25_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
6706_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6725_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KPS 200X150_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
SU 60_ZM
REDUCTION PIECE
It is used for making an additional branching use an
unequal T-piece or cross.
Advantage of this usi...
5240 ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
6708_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
DT 300_F
BRACKET - HEAVY
The holder is designed to be mounted on a wall or a ceiling
profile.
For assembly to the ceiling pro...
K 60X75_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X400_S
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLSU_S
CABLE LADDER WALL BRACKET
Use screws NSM 6X10 for installation to cable ladder.
The 8 mm anchor is used for mounting on the wa...
KO 90X60X400_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 6X70_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X300_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 50_PO
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X150X1.50_PO
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MN 10_ZNCR
RIVETING NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NP 150_F
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X200_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X300_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 8_GMT
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PKC1 1212_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
S 10X40_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SD 2_S
GROUPED CABLE HOLDER
Note for system with maintained functionality in fire: Used to create cable routes for multiple c...
SO 90X60X75_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 800_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X350_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X400_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZVB 1.5_S
OUTER SIDE HANGER
The outer side hinge is designed for hanging a cable route running through cable ladders on a ZT 8...
KS_PO
CERAMIC CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
NSM 6X20_ZNCR
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with
accessories, or to attach trays to supp...
6708_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6722_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KPS 200X200_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
KO 90X60X100_ZM
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
5250 ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
6708_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
DT 400_F
BRACKET - HEAVY
The holder is designed to be mounted on a wall or a ceiling
profile.
For assembly to the ceiling pro...
KL 60X150_F
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLKR 60X200_F
CROSS-OVER
The connection of the cross-over with the ladder is performed by using the 8 pcs couplings S 60X200 ...
KLT 60X200_F
T-PIECE
The connection of the T-piece with the ladder is performed by using the 6 pcs couplings S 60X200 a...
KO 90X60X50_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 8X77_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X300_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 50_POF
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X200X1.50_PO
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MN 8_ZNCR
RIVETING NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
NP 150_S
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X200_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X300_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 8_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PM 41 M 10_GMT
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X40_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SK 60_GMT
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
SPL 1000_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X100_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
SR 60X50_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X50_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KPBSKL 200_POF
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire: There are used the screws NSM 6X10 for the...
KS_2PO6
CERAMIC DOUBLE CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
NSM 6X20_GMT
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with accessories, or to attach trays to su...
6710_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
MVH P800_PO
MAGNETIC ATTACHMENT
Suitable for PO clamps series 67xx_POBD. For K-PULSA 40E_PO nail gun. Strong magnet for fixing the...
KPS 200X300_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
KO 90X60X200_ZM
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
5263 ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. Note for system with mai...
6710_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
INOXMP 41X21_IX
ASSEMBLY PROFILE STAINLESS STEEL
Suitable for creating of beam for cable traces to be carried on thread bars or for creating of sup...
KL 60X150_PO
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLKR 60X200_S
CROSS-OVER
The connection of the cross-over with the ladder is performed by using the 8 pcs couplings S 60X200 ...
KLT 60X200_S
T-PIECE
The connection of the T-piece with the ladder is performed by using the 6 pcs couplings S 60X200 a...
KO 90X60X50_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 8X77_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X400_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 75_PO
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X200X1.50_POF
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MP 41X21_F
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NP 200_F
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X300_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X400_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PKC1 1198_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PM 41 M 10_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X50_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SK 60_S
HINGED JOINT
For the connection of the hinged joint to the tray there are used the
bolts NSM 6X10.
The joint is d...
SPL 1200_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X100_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
SR 60X50_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X50_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KPBSKL 300_POF
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire: There are used the screws NSM 6X10 for the...
KS_2PO10
CERAMIC DOUBLE CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
KS_PO10
CERAMIC CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
6712_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
PLYN_PO
GAS CARTRIDGE (2 PCS)
Capacity up to 750 shots. For the K-PULSA 40E_PO gas nailer.
...
KPS 200X400_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
KO 90X60X300_ZM
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
WEICON 750_XX
ZINC PAINT
Corrosion protection for repair of defective and damaged places on galvanized surfaces. The colour...
6710_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X100_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X150_POF
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLKR 60X300_F
CROSS-OVER
The connection of the cross-over with the ladder is performed by using the 8 pcs couplings S 60X200 ...
KLT 60X300_F
T-PIECE
The connection of the T-piece with the ladder is performed by using the 6 pcs couplings S 60X200 a...
KO 90X60X75_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 8X97_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X400_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 75_POF
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X300X1.50_PO
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MP 41X21_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NP 200_S
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X300_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X400_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PKC1 1199_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PM 41 M 12_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X70_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X100_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPL 200_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X125_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
SR 60X75_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X75_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KPBSKL 400_POF
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire: There are used the screws NSM 6X10 for the...
SB 6.3X45_POGMT
CONCRETE SCREW
Note for system with maintained functionality in fire: Used to attach independent cable clamps, O...
KPS 160X150_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
6720_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
OPT_EN
DESIGNATION OF FIRE TRAYS
Note for system with maintained functionality in fire: Designation of the fire trays You find mo...
KPS 200X500_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
KO 90X60X50_ZM
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
GZS_XX
ZINC SPRAY
Corrosion protection for repair of defective and damaged places on galvanized surfaces. Spray appl...
6712_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X100_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X150_S
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLKR 60X300_S
CROSS-OVER
The connection of the cross-over with the ladder is performed by using the 8 pcs couplings S 60X200 ...
KLT 60X300_S
T-PIECE
The connection of the T-piece with the ladder is performed by using the 6 pcs couplings S 60X200 a...
KO 90X60X75_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 8X97_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X50_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KZ 60X300X1.50_POF
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MP 41X21X1.50_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NP 250_F
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X400_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.
The outer right angle of the side walls is replaced by ...
OH 60X50_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PKC1 1200_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PM 41 M 6_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 10X70_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X100_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPL 300_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X125_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
SR 60X75_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X75_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
NSM 6X10_GMT
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with accessories, or to attach trays to su...
6706_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KPS 160X300_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
6716E_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
OPT_DE
DESIGNATION OF FIRE TRAYS
Note for system with maintained functionality in fire: Designation of the fire trays You find mo...
KPS 200X600_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
SO 90X60X100_ZM
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
WEICON 375_XX
ZINC PAINT
Corrosion protection for repair of defective and damaged places on galvanized surfaces. The colour...
5208 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
6712_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X150_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X200_F
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLKR 60X400_F
CROSS-OVER
The connection of the cross-over with the ladder is performed by using the 8 pcs couplings S 60X200 ...
KLT 60X400_F
T-PIECE
The connection of the T-piece with the ladder is performed by using the 6 pcs couplings S 60X200 a...
KPBSKL 150_PO
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KPOZ 10_PO
METAL ANCHOR
The knock in anchors serve for the direct attachment of the threaded rods. The loading capacity of...
KR 60X50_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KZ 60X50X1.50_PO
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MP 41X21X1.50X2000_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NP 250_S
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X400_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.
The outer right angle of the side walls is replaced by ...
OH 60X50_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PKC1 1201_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PM 41 M 8_ZNCR
SLIDING NUT
Used for the attaching of the brackets to the ceiling profiles or profiles (41X41 and 41X21) each ot...
S 12X20_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X150_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPL 400_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X150_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
SU 60_F
REDUCTION PIECE
It is used for making an additional branching use an
unequal T-piece or cross.
Advantage of this usi...
US 1_ZNCR
FIXATION CLAMP
The fixation clamp is used for fixation of the threaded rod on I profile, a
packing includes a fixat...
KPBSKL 150_POF
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire: There are used the screws NSM 6X10 for the...
KVP 5X35_PO
KHP DOWEL SCREW
KHP dowel screw with functionality in case of fire. Fire resistance up to 90 minutes. Ideal connec...
6714_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KPS-STOP_PO
FIRE-RESISTANT PUTTY
Designed for KPS 200X cable clamp cover... . In conjunction with the KPS 200X cover, the anti-fire...
SO 90X60X50_ZM
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
5216E ZNM_S
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. Note for system with mai...
5210 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
6716E_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X150_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X200_PO
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLKR 60X400_S
CROSS-OVER
The connection of the cross-over with the ladder is performed by using the 8 pcs couplings S 60X200 ...
KLT 60X400_S
T-PIECE
The connection of the T-piece with the ladder is performed by using the 6 pcs couplings S 60X200 a...
KPBSKL 200_PO
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KPOZ 6_PO
METAL ANCHOR
The knock in anchors serve for the direct attachment of the threaded rods. The loading capacity of...
KR 60X75_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KZ 60X50X1.50_POF
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MP 41X41_F
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NP 300_F
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X50_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X75_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PKC1 1202_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 10_GMT
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 12X30_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X150_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPL 500_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X150_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
SU 60_S
REDUCTION PIECE
It is used for making an additional branching use an
unequal T-piece or cross.
Advantage of this usi...
US 2_ZNCR
FIXATION CLAMP
The fixation clamp is used for fixation of the threaded rod on I profile, a
packing includes a fixat...
DT OKO_POF
PROTECTIVE SAFETY HOLDER
DT OKO holder is used with DT bracket. For standardized cable trays and ladders. DT bracket with D...
6720_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KVP 5X40_PO
KHP DOWEL SCREW
KHP dowel screw with functionality in case of fire. Fire resistance up to 90 minutes. Ideal connec...
6714_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6708D_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
O 90X60X100_ZM
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
SO 90X60X200_ZM
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
5220 ZNM_S
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5212 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
6716E_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X200_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X200_POF
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLOBH 60X150_F
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X100_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPBSKL 300_PO
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KPOZ 8_PO
METAL ANCHOR
The knock in anchors serve for the direct attachment of the threaded rods. The loading capacity of...
KR 60X75_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KZ 60X75X1.50_PO
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MP 41X41_S
ASSEMBLY PROFILE
Suitable for creating of beam for cable traces to be
carried on thread bars or for creating of suppo...
NP 300_S
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X50_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X75_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PKC1 1203_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 10_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 12X40_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X200_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPL 600_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X200_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X100_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
VS 41X45_F
ASSEMBLY ACCESSORIES
For attaching the threaded rod to the wall at an angle of 45°. Note for system with maintained ...
KBS 6X35 M8/M10_PO
BOLT INTO CONCRETE WITH INTERNAL THREAD
M8 / M10 combined screw for quick and easy mounting of screws or threaded rods. Designed for insta...
6720_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KVP 5X45_PO
KHP DOWEL SCREW
KHP dowel screw with functionality in case of fire. Fire resistance up to 90 minutes. Ideal connec...
6714_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6710D_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
O 90X60X200_ZM
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
SO 90X60X300_ZM
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
5225 ZNM_S
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5216 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
6716ED_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X200_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X200_S
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLOBH 60X150_S
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X100_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPBSKL 400_PO
COUPLING FOR CABLE LADDERS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KPS 160X200_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
KSBS 100_PO
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
KZ 60X75X1.50_POF
CABLE TRAY WITHOUT INTEGRATED COUPLING
Note for system with maintained functionality in fire: For connecting the trays are designed for ...
MS KPS_PO
MOUNTING KIT FOR CABLE CLAMP COVER
Note for system with maintained functionality in fire:The kit always needs to be ordered with the cl...
NP 30X15X1.20_S
LOAD BEARING PROFILE
It is used for mounting of cable clamps and thereby for the anchoring of the cables to the ceiling...
O 90X60X75_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OPT_CZ
DESIGNATION OF FIRE TRAYS
Note for system with maintained functionality in fire: Designation of the fire trays You find mo...
PKC1 1204_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 12_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 12X50_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X200_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPL 800_F
CEILING PROFILE - LIGHT
Designated for one sided fastening of the brackets DLN, DS, DSN, DT and DTN with the use of slidin...
SR 60X200_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X100_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 10_GMT
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
KPO 8X110_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KS_PO10J
CERAMIC CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
KVP 5X50_PO
KHP DOWEL SCREW
KHP dowel screw with functionality in case of fire. Fire resistance up to 90 minutes. Ideal connec...
6718_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6712D_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
O 90X60X300_ZM
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
5232 ZNM_S
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5220 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
6716ED_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K 60X300_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X300_F
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLOBH 60X200_F
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X150_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 10X115_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KPS 160X400_PO
CABLE CLAMP COVER
Note for system with maintained functionality in fire: KPS cover includes insulation wool and a c...
KSBS 100_POF
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
M 10_GMT
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
MZ 10_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
NP 350_F
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
O 90X60X75_S
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
P 60_F
PARTITION
The connection is performed using the bolts NSM 6X10, 2 pcs per 1 meter. The partition is used to ...
PKC1 1205_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 6_GMT
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X20_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X300_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 1000_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X25_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X150_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 10_ZNC3
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
KPO 10X175_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KS_PO16
CERAMIC CLAMP
Ceramic terminal blocks are only intended as spare parts for KSK boxes with fire performance. Sing...
KVP 6X40_PO
KHP DOWEL SCREW
KHP dowel screw with functionality in case of fire. Fire resistance up to 90 minutes. Ideal connec...
6718_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6710D_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
O 90X60X400_ZM
ELBOW 90°
To fix the connection use the bolt NSM 6X10.
The outer right angle of the side walls is replaced by ...
5250 ZNM_S
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5225 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
DSOS 10_ZNCR
BRACKET FOR TRAPEZE CEILINGS
Fix to the celling profile SPLN, SPSN or SPU using bolts S 10X20, nuts M 10 and washer PD 10.Note fo...
K 60X300_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X300_PO
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLOBH 60X200_S
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X150_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 10X115_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X100_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 150_PO
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
M 10_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
MZ 12_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
NP 350_S
LOAD BEARING PROFILE
Suitable for creating of beam for cable traces to be carried on thread rods.
The load bearing profil...
OH 60X100_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
P 60_S
PARTITION
The connection is performed using the bolts NSM 6X10, 2 pcs per 1 meter. The partition is used to ...
PKC1 1206_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 6_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X20_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X300_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 1200_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X25_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X150_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 10_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
KHP 6X32_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
TP_PO
THERMAL FUSE
The box KSK can also be fitted with more fuses when other parameters of tested boxes remain the sa...
KVP 6X50_PO
KHP DOWEL SCREW
KHP dowel screw with functionality in case of fire. Fire resistance up to 90 minutes. Ideal connec...
6718_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6712D_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
O 90X60X50_ZM
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
5263 ZNM_S
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. The clamps are designed to ...
5232 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
DSOS 8_ZNCR
BRACKET FOR TRAPEZE CEILINGS
Cable tray will be attached to the DL holder using the bolts NSM 6X10.Note for system with maintaine...
K 60X400_F
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X300_POF
CABLE LADDER
Note for system with maintained functionality in fire: The distance of rungs of cable ladders for...
KLOBH 60X300_F
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X200_F
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 10X95_PO
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X100_S
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 150_POF
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
M 12_GMT
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
MZ 6_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
NSM 6X10_ZNCR
CARRIAGE BOLT AND LOCK NUT
This bolt is used to connect cable trays or cable trays with
accessories, or to attach trays to supp...
OH 60X100_S
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 10_GMT
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PKC1 1207_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 8_GMT
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X30_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X400_F
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 200_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X250_F
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X200_F
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 12_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
KHP 8X38_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
S 8X25_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
6722_PO
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
K-PULSA_PO
NAILGUN
Suitable for PO clamps series 67xx_POBD. Battery capacity max. 3000 shots. Charging time - 90 minu...
KL 60X200_ZM
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
5216E ZN_F
CLAMP OMEGA
The clamps are designed to attach EN varnished steel pipes to the pad. Note for system with mai...
5240 D_ZNCR
CLAMP DOBRMAN
For fixing to the base material are suitable the KPO 6 anchors or the KPOZ 6 anchor in combination...
DT 100_F
BRACKET - HEAVY
The holder is designed to be mounted on a wall or a ceiling
profile.
For assembly to the ceiling pro...
K 60X400_S
END-PIECE
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
KL 60X300_S
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLOBH 60X300_S
HORIZONTAL BEND
The connection of the bend with the ladder is performed by using the 4 pcs couplings S 60X200 and 16...
KO 90X60X200_S
LOW ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
KPO 10X95_POGMT
METAL ANCHOR
The anchors are designed for drag and thus fastening the structural elements to the underlying mat...
KR 60X150_F
CROSS-OVER
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
KSBS 200_PO
COUPLING FOR CABLE TRAYS
Note for system with maintained functionality in fire:There are used the screws NSM 6X10 for the con...
M 12_ZNCR
HEXAGON NUT
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
MZ 8_ZNCR
CONNECTION NUT
Used for the connection of two threaded rods. Note for system with maintained functionality in ...
O 90X60X100_F
ELBOW 90°
To fix the connection use the bolt NSM 6X10.Note for system with maintained functionality in fire:Yo...
OH 60X150_F
HORIZONTAL BRANCH
To fix the connection use the bolt NSM 6X10.
Horizontal branch is used for additional branching from...
PD 10_ZNCR
WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
PKC1 1208_F
CABLE CLAMP FOR 1 CABLE
A min and B indicate the minimum and maximum diameter of the cable being fastened.
For basic orienta...
PVL 8_ZNCR
LARGE WASHER
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
S 8X40_ZNCR
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire:You find more information in the catalogue Sys...
SO 90X60X400_S
RISING ELBOW 90°
To fix the connection use the bolt NSM 6X10 Note for system with maintained functionality in fi...
SPS 300_F
CEILING PROFILE - MEDIUM
Designated for one sided fastening of the brackets DLN, DSN, DT
and DTN with the use of sliding nuts...
SR 60X250_S
REDUCTION
The fastening of the joint is performed with the bolts NSM 6X10.Note for system with maintained func...
T 60X200_S
T-PIECE
To fix the connection use the bolt NSM 6X10.
Use horizontal branch OH or reduction piece SU to make ...
ZT 6_ZNCR
THREADED ROD
Note for system with maintained functionality in fire: It is used for suspending of a cable line ...
KHP 8X60_PO
METAL EXPANSION ANCHOR
For pre-assembled mounting in concrete, porous concrete, vertically perforated bricks, natural sto...
S 8X30_GMT
BOLT WITH HEXAGONAL HEAD
Note for system with maintained functionality in fire: You find more information in the catalogue...
6722_POGMT
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
6708D_POBD
CLAMP FOR CABLES
Clamps are fixed to the base material using SB 6.3X35 concrete bolts. To the aerated concrete usin...
KL 60X300_ZM
CABLE LADDER
The joining of the ladders is performed by using the couplings S 60X200 and min. 4 pcs of bolts NS...
KLSU_ZM
CABLE LADDER WALL BRACKET
Use screws NSM 6X10 for installation to cable ladder.
The 8 mm anchor is used for mounting on the wa...