News ELECTRON 2011

---

KU 68 LD/1 - Electric installation boxes into hollow walls

It is produced by progressive double injection technology, where is used combination of hard PVC and soft material for incoming holes. While passing the cables into box, the soft material is break through and closely embrace the cable.
Because of this, the box is protected against an air penetration and an air draught, against a dust to get into box even a wateriness, its improved soundproofing and decreasing power consumption needs for heating. Simple and easy installation by abutment screws. This box is recommended to be used in all new houses our flats and it is necessary part in passive houses.

LHD 20X20, LV 18X13, LHD 40X20, LHD 40X40 a LP 35 - Electric installation trunking made of colored materials

We offer trunking LHD 20x20, LV 18x13, LHD 40x20, LHD 40x40 and LP 35 made of colored material in dark and light brown.
It makes a wooden imitation.
Those trunking are designed to be used in wooden and modern interiors.
It is made of self snuffing PVC and a temperature resistance is -5 up to +60°C.

8117 PO10, 8117 PO16, 8110 PO6 - Fire resistance boxes

Fire resistant boxes are fit with a ceramic terminal plate and are designed to be used for fire resistance cables.
The ceramic plate is suitable for 5 current leads with intersection from 1,5mm to 16mm².
The boxes are fixed by screw into concrete. The boxes include bushing, which fixed the cables or pipes in box.
According to specification ZP 27/2008 and norms DIN 4102-12, STN 92 0205.
Mentioned products were testing by 1006°C temperature in period of 90 minutes.
The boxes are produced in two types.

8117 PO10, PO16 (big) - dimension: 167 x 167 x 78 mm
8110 PO6 (small) - dimension: 117 x 117 x 58 mm

KOPOKAN - Earthen channel

Earthen Channels are intended for mechanical protection of distribution of engineering networks to be fitted into the ground. By its technical parameters they fully replace the previously used concrete conduits.
They are used for additional protection already installed engineering networks.
Earthen Channels are delivered in different dimensions, including lid to be equipped by red printing. For connection of two channels there are used the couplings to be made for each dimension of Earthen Channel.

PUK 38X150 S1 - Floor Channel

It completes the KUP Universal Floor Box. Floor Channel services to interconnection of particular Boxes KUP 57 or KUP 80. It is made of metal plate of the thickness of 0,7 mm with Sendzimir process of surface zinc modification. For conductive interconnection of Floor Channels services the interconnection wires of Floor Channel PLUK and PLUK 1.

Horizontal Side Coupling BSKH

   

It extends the accessories of Cable Bridges. It serves to the deviation of the trace of Cable Bridges or as the replacement of adapting pipes. Horizontal Side Coupling there is possible to form for proper bend angle by the mild pressure of the hand. It is delivered at metal plate thickness of 2 mm and it is equipped by surface finish by zinc modification of Sendzimir. There is also possible to deliver the zinc modification by hot-dip galvanizing.

Outer Hanger ZVNE and Inner Hanger ZVNI for Cable Trays Mars

   
   

They are intended for ceiling trace hanging. Maximum load for both types of Hangers is 90 kg. ZVNE is suitable for hanging of the trays with counter.

< back to list